HLMW-100/150 Ultra-Thin Multi-Wire Saw is an amazing block cutting machine developed by Hualong Machinery after years of independent research and development. It redefines the next generation of stone block cutting technology. It uses 0.3-0.8mm fine diamond wire to cut blocks with a yield rate of over 98%. HLMW-100/150 will be your next machine to cut blocks into slabs, bringing more benefits below:
High Yield - Thin wire saws with cutting grooves of only 0.4-0.7mm achieve a yield of over 97%, which is 15-20% higher than conventional methods.
Reduces stone powder emissions by over 90%.
Noise Reduction - without vibration, reducing noise levels by over 40 dB.
It can produce ultra-thin slabs under 10mm.
The machine's high precision enables wire-mark-free surfaces and improves slab flatness by up to 50%.
Power Saving - It reduces energy consumption by 50% due to significantly lower cutting friction.
Space Saving - It reduces the equipment footprint by over 30%.
Solve Marbles' With Cracks Cutting Broken Problem Buy Gangsaw Or Traditonal Multi Wire Saw Machine As Super Thin Wire Saw's Wire Is Φ0.55m Only, As Thiner Wire Used, As Lower The Friction Which Can Avoid The Cutting Broken Like Picture Below:
Machine's structure is suitable for both marble and granite's cutting.
Whether it is cutting marble or cutting granite, the cutting surface is very flat, and the cutting speed is fast.
Flatness is controlled within +/-0.3mm
Use a level ruler to measure the flatness of the slab.
It can be seen that the light transmittance is very uniform, which indicates that the surface of the slab is very flat.
The output is 15% more than gangsaw and 20% more than traditional wire/rope saw.
Because diameter difference means yield difference.
HLMW-100/150's diamond wire saw diameter is 0.55mm
Traditional diamond multi-wire saw machine is 5.3MM
Gangsaw belt saw with segments, the thickness is 3.5mm
Is the diamond wire of your machine easy to break?
HUALONG multi-wire saw machine will not.
This is because we have upgraded our patented mechanical structure and unique winding technology, ensuring the diamond wire will never break.
Please note the following:
For raw blocks with a Mohs hardness of 7 or less, the diamond wire can cut smoothly and stably without breaking.
For raw blocks with a Mohs hardness greater than 7, the diamond wire will temporarily fail to engage. The diamond abrasive will wear down rapidly, but the diamond wire itself will not break.
If the diamond wire breaks accidentally due to external forces, depending on the location of the break, it can be repaired and cutting resumed within 0.5-5 hours.
Especially For Some Expensive Imported Marbles, As More Production, As More Profit Gotten
