Precautions When Using Marble Polishing Machine

The standardized use of marble polishing machine can not only ensure the polishing effect, but also extend the life of the equipment and avoid safety accidents. The following are specific precautions:

When using a marble polisher, please note the following:

Safety precautions: Wear goggles, a mask, and non-slip shoes. Avoid contact with rotating parts.

Environmental checks: Ensure the floor is dry and free of debris. Avoid electrical and water sources.

Grinding Pad Selection and Replacement:
Matching the Stone: Select the grinding pad type based on the hardness of the marble to ensure grinding efficiency.

Check the condition of the grinding pad: Before installation, confirm that the grinding pad is free of cracks, missing teeth, and that the clips are intact. If the grinding pad is severely worn during use, it should be replaced promptly to avoid uneven polishing due to grinding pad failure.

Operating Instructions:

Start at a low speed and move the machine at a constant speed to avoid local overheating.

Keep the grinding disc perpendicular to the ground, avoiding tilting or unilateral force.

Regularly clean the grinding disc and the ground to prevent clogging.

Don'ts during operation:

Do not place extraneous objects (such as tools or buckets) in the polishing area to prevent them from being crushed by the equipment and causing damage or tripping.

Maintain balance during polishing to prevent the equipment from tipping over. If you need to adjust the direction, slow down before moving and avoid sudden turns.

Do not use unwaterproofed equipment in humid environments to prevent water from entering the motor and short-circuiting. When adding water for cooling, control the amount of water to prevent water from seeping into the equipment.

When moving the equipment or changing the grinding disc, be sure to turn off the power and unplug the unit. Wait until the work plate has completely stopped before operating to prevent accidental activation of the start switch.