CNC Diamond Wire stone Cutting Machine

Product Description 

The shapes a blade saw cannot reach.

 

A bridge saw cuts flat. A wire saw cuts curves. That is the whole story in one sentence.

 

If your shop makes countertops, a bridge saw is your machine. But the moment a client asks for a curved facade panel, a solid Roman column, or a five-meter cornice profile - the blade hits its limit. You either subcontract the job out, or you hand it to a wire machine.

 

The HLSJ-2000 is that wire machine.

 

Four axes. One wire. Infinite curves.
The diamond wire on this machine is 8 to 10 millimetres thick and 15.1 meters long. It runs on a flywheel system at 25 to 45 meters per second, slicing through stone like a band saw through wood - except the "blade" is a flexible rope embedded with diamond beads.

 

Because the wire bends, it goes where no rigid blade can: inside curves, around columns, along architectural profiles. The CNC system controls four axes simultaneously - X, Y, Z, and the wire rotation - so the wire follows any 2D or 3D path you program.

 

What comes off this machine:

• Circular arc panels for curved facades
• Solid and hollow columns - Roman, fluted, tapered
• Large-scale solid line profiles - cornices, balustrades, window surrounds
• Letters and signage carved in stone
• Any complex shape that starts with a drawing and ends with a finished piece

 

Constant tension. Constant accuracy.
Wire cutting has one enemy: tension fluctuation. When the wire stretches unevenly, the cut wanders. You get a curved surface that is supposed to be straight, or a column that is supposed to be round but comes out slightly egg-shaped.

 

The HLSJ-2000 solves this with a flywheel tension system that maintains constant stretch on the wire throughout the entire cut. The wire stays at the same tension from the first millimetre to the last. That is what gives you dimensional accuracy on a 2000-millimetre arc - the kind of precision that lets your installer set the panel without shimming.

 

2000 × 2000 × 1500mm. Big enough for real architecture.
The processing envelope is 2000 × 2000 × 1500mm. That is not a tabletop machine. It is big enough for:

• A solid column up to 2 meters tall
• A curved panel section for a building facade
• A large cornice or profile run
• Architectural elements that a slab saw physically cannot accommodate

 

The main motor is 11kW. Cutting speed is adjustable from 25 to 45 m/s depending on material - slower for hard granite, faster for softer marble and limestone. You set the speed to match the stone, not the other way around.

 

The margins come off flat and clean.
A common complaint with older wire machines is that the cut surface needs heavy grinding before it is usable. The HLSJ-2000 does not have that problem. The combination of constant tension and adjustable speed means the cut surface comes off flat and sleek - ready for finishing with minimal secondary work.

 

Water consumption is 2 cubic meters per hour. The water does two jobs: cooling the diamond wire and flushing stone dust out of the kerf. Closed-loop water systems are available if your facility needs to recycle.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter	Specification
Model	HLSJ-2000
Control System	CNC, 4-axis simultaneous linkage
Wire Diameter	8–10 mm
Wire Length	15100 mm
Main Motor Power	11 kW
Max Processing Size	2000 × 2000 × 2000 mm
Cutting Linear Speed	25–45 m/s (adjustable)
Water Consumption	2 m³/h
Dimensions (L×W×H)	6000 × 7000 × 4000 mm
Gross Weight	6800 kg

 

 

Hot Tags: CNC Diamond Wire stone Cutting Machine, China CNC Diamond Wire stone Cutting Machine manufacturers, suppliers, factory, diamond wire saw machine for quarry, limestone quarry chain saw, onyx quarry cutting machine, quarry block shaping machine, quarry hydraulic splitter system, quarry splitting wedge system